WINDOWS 8 THEME FOR WAVE Y M
This theme is supported on the following Samsung phones:
- S5380 Wave Y (Bada 2.0)
- S7250 Wave M (Bada 2.0)
Download and install - Update Galaxy S3 LTE I9305 with Official Jellybean 4.1.1 XXALI5 Firmware
Sunday, September 23, 2012
Step-By-Step Instructions:
Step 1 - Download Android 4.1.1 I9305XXALI5 for Galaxy S3 to your computer and extract the zip file.
Step 2 - Download ODIN v1.85 which will help you to install Android 4.1.1 on Samsung Galaxy S3 I9305.
Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy S3 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
- Click on ‘PDA’ and select file with ‘CODE’ in its name.
- Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S III LTE has now been updated to Android 4.1.1 build XXALI5 firmware update. Go to Settings > About phone to verify.
Hit +1 or LIKE as a thanks to us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
Viber for wave 1 and wave 2
Saturday, September 22, 2012
1. flash your phone with a file provided above according to your wave model…(it will show your phone as wave 3 on the samsung app store)
(dnt wory no data will b loss)
2. open samsung app store on your phone or kies.
3. search for VIBER BADA and simply install it
(dnt wory no data will b loss)
2. open samsung app store on your phone or kies.
3. search for VIBER BADA and simply install it
Android Jelly Bean - Slim bean for samsung Wave I S8500 V2.3.0
WHAT WORKS:
- Faster!
- SD Card!
- Play Store
- Cam
- Sound
- Wifi
- Bluetooth
- Music App
- File Manager
- SuperSU
- Browser
- DSPManager
- YouTube
- Rotation
- JB Lockscreen
- USB Storage
Put All the four files in Phone memory
Dont use other .img files!
Dont use other .img files!
Download and install - Update Galaxy GIO S5660 with XWKT7 based Adrenaline Custom ROM Firmware
How to Update Galaxy GIO S5660 with XWKT7 based Adrenaline Custom ROM Firmware
For all the users who are having the Samsung Galaxy GIO S5660 device can now rejoice as in the due course of this article we will be checking out on how you can install the latest Gingerbread 2.3.6 based adrenaline custom ROM firmware. Unfortunately, there will be no updates by SAMSUNG for this phone anymore, so if you are expecting an ICS or a jellybean update then you will have to make use of custom ROM firmwares. To help understand you better, we have summed up a list of features, quick pre requisites along with a detailed procedure and screen captures on how this firmware looks like.Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.
Features of Adrenaline Firmware:
- Stock XWKT7 CWM Flashable Zip
- Full deodexed
- ULTRA Lite [ Only 81mb ROM Size ! ]
- Superb Smooth and Speedy Compared To Other Stock Rom Based Custom ROM [ Bloatware Free ]
- Best Battery Life Compared To Other Stock Based Custom Rom
- Filesystem Are In EXT4 Format [ Best System Performance ]
- Disabled Journaling /system /data /cache In Default [ High Speed ]
- CF-Root b84 ex [ Overclock-able ]
- Full BLN support [ BLN Control Free Version Included In Addons Section ]
- DT A2sd Applied
- Touchwiz30 Transparent Statusbar Mod
- Smooth Scrolling Enabled
- Crt Animation Enabled
- ICS Transition Animations Enabled
- Ads Free
- Better Touchscreen Sensitivity
- Adrenaline™ CPU Control + Adrenaline Boost™ Included
- Control your CPU a breeze | Adrenaline CPU Control
- Boost your system performance | Adrenaline Boost
How to Update Galaxy GIO S5660 with XWKT7 based Adrenaline Custom ROM Firmware
Procedure to Update Galaxy GIO S5660 with Adrenaline Firmware:
- Download the XWKT7 based Adrenaline Custom ROM firmware Package from here to your computer. Once downloaded, connect your phone to the computer and place the zip file in your phone.
- Disconnect the phone from computer and turn Off the device so that it can be entered in the recovery mode. The recovery mode in the Galaxy GIO S5660 can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. Additionally, you can also enter the Galaxy GIO in the recovery mode from the ROM Manager app.
- In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the XWKT7 based Adrenaline Custom ROM firmware Package which you have placed in the phone.
- Once the device is updated, you will have to select the option of “reboot system now” for rebooting the device. You can check whether the device has been updated or not from the path ”Settings > About phone” where the current firmware version will be shown as XWKT7 Adrenaline firmware.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
Congratulations, you have now successfully applied the firmware of Adrenaline based XWKT7 in your Galaxy GIO S5660. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.
Install ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300
Thursday, September 20, 2012
How to Install ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300
- The process may result in losing all of your data like apps, messages, contacts etc. So first of all take back up of all data to work risk-free.
- Uninstall the antivirus from device (if any).
- Don’t let the power of the device to create any problem for you. So keep your device charged at least 50 percent.
- Download the ClockworkMod from here.
- Download Odin v3.04 from here
- Extract Odin3_v3.04.zip
- Enter your Galaxy S3 into download mode by pressing the Volume Down + Power + Home buttons together.
- Now connect your Galaxy S3-I9300 to your computer by using USB cable.
- On successful attachment, you will see the “Added” message in Odin window.
- In Odin, click the PDA button and select the ClockworkMod.zip file from there.
- In the Odin, click on ‘Start’ button in order to start the flashing of ClockworkMod recovery image on your Galaxy S3-I9300.
- When the flashing gets completed, your Galaxy S3 will reboot automatically.
- You can disconnect your Galaxy S3 from PC after the Samsung Logo gets appeared.
- To enter into the recovery mode, press Home and Volume Up buttons.
That’s it. You have now successfully installed ClockworkMod Recovery (CWM) on Samsung Galaxy S3 GT-I9300. The process is very simple and I hope you will follow it properly. If you face problem in any step, then do let us know by your valuable comments in the comment section below.
Download and install AT & T Samsung Galaxy S3 Gets UCALH9 Based Software Update
So if you are an AT & T Galaxy S3 customer then grab the latest firmware on your device now by going through the Settings> About Device > Software Update and then finally tap on Check for Updates.
WiseAndroid Theme for bada - wave
Wednesday, September 19, 2012
WiseAndroid Theme for bada 2.0
This theme is supported on the following Samsung phones:
- Wave II (Bada 2.0)
- Wave III (Bada 2.0)
- Wave S8500 (Bada 2.0)
Download and install - Update Galaxy S2 GT I9100 with Official ICS XWLPX 4.0.4 Firmware
How to Update Galaxy S2 GT I9100 with Official ICS XWLPX 4.0.4 Firmware
Procedure to Update Galaxy S2 with ICS XWLPX Firmware:
- Download XWLPX Firmware Package and Odin from here to your computer. Once downloaded, extract both the zip files preferably to the desktop. Now, turn off the computer so that it can be then entered in the download mode.
- Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
- Open Odin in your computer. Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM Section will turn Yellow.
Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
- Install the USB Drivers in your computer &
- Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
- Click on “PDA” and select the tar file which you got after extracting the firmware update package. After selecting the PDA file, click on “Start” to start the process of firmware update. As soon as the device is updated successfully, the device will be restarted. As soon as you see the home screen or language preference setting options, you can then disconnect the device and turn Off the device in the recovery mode.
- Recovery mode in Samsung Galaxy S II I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
- In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” for clearing out all the cache data present in your device. Once it’s done, select “reboot system now”. As soon as the device is rebooted, you can check the same whether the firmware update has been applied or not from the path “Settings > About phone > Firmware version” where it will be mentioned as XWLPX.
Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.
Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.
Download and install - Update Galaxy ACE S5830i with Simplicity Custom ROM Firmware
Tuesday, September 18, 2012
Procedure to Update Galaxy ACE S5830i with Simplicity Custom ROM Firmware:
- Download Simplicity Firmware Package from here to your computer. Once downloaded, connect your Samsung Galaxy ACE 5830i with the computer and place this file in your device.
- After placing the files, disconnect the Galaxy ACE 5830i device and turn off the device so that it can be entered in the recovery mode. Ensure that you haven’t placed the zip file deep into the sub folders.
- The recovery mode in the Galaxy ACE S5830i can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. You can also enter the device in the recovery mode from the “ROM Manager” app which you can download from the Google PLAY Store.
- In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Simplicity Firmware Package which you have placed in the phone. Once the file is selected, it will take around 4 -5 minutes for applying the same. Please note that it will take more than normal time for rebooting the device for the first time. Just in case if the device refuses to boot up, all you need to do is to just enter the device in the recovery mode and wipe all the cache and data from the recovery mode.
Once it’s done, the device will be restarted and bingo there you go, you have now successfully learnt on how to apply this Gingerbread based Simplicity custom ROM firmware in your device. Do let us know in the comments section below just in case if you face any issues as we will be more than happy t help you out.
Subscribe to:
Posts (Atom)
