Download and install - Update Galaxy S3 LTE I9305 with Official Jellybean 4.1.1 XXALI5 Firmware

 

Step-By-Step Instructions:

Step 1 - Download Android 4.1.1 I9305XXALI5 for Galaxy S3 to your computer and extract the zip file.

Step 2 - Download ODIN v1.85 which will help you to install Android 4.1.1 on Samsung Galaxy S3 I9305.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Galaxy S3 USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

• Click on ‘PDA’ and select file with ‘CODE’ in its name.
• Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
• Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
• Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy S III LTE has now been updated to Android 4.1.1 build XXALI5 firmware update. Go to Settings > About phone to verify.

Hit +1 or LIKE as a thanks to us!

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

»»  READMORE...

Download and install - Update Galaxy GIO S5660 with XWKT7 based Adrenaline Custom ROM Firmware

 

• Reviews
  • Galaxy S3
  • Note
  • One X
  • Razr
  • LG 4X HD

• 2

How to Update Galaxy GIO S5660 with XWKT7 based Adrenaline Custom ROM Firmware

For all the users who are having the Samsung Galaxy GIO S5660 device can now rejoice as in the due course of this article we will be checking out on how you can install the latest Gingerbread 2.3.6 based adrenaline custom ROM firmware. Unfortunately, there will be no updates by SAMSUNG for this phone anymore, so if you are expecting an ICS or a jellybean update then you will have to make use of custom ROM firmwares. To help understand you better, we have summed up a list of features, quick pre requisites along with a detailed procedure and screen captures on how this firmware looks like.

Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.

Features of Adrenaline Firmware:

• Stock XWKT7 CWM Flashable Zip
• Full deodexed
• ULTRA Lite [ Only 81mb ROM Size ! ]
• Superb Smooth and Speedy Compared To Other Stock Rom Based Custom ROM [ Bloatware Free ]
• Best Battery Life Compared To Other Stock Based Custom Rom
• Filesystem Are In EXT4 Format [ Best System Performance ]
• Disabled Journaling /system /data /cache In Default [ High Speed ]
• CF-Root b84 ex [ Overclock-able ]
• Full BLN support [ BLN Control Free Version Included In Addons Section ]
• DT A2sd Applied
• Touchwiz30 Transparent Statusbar Mod
• Smooth Scrolling Enabled
• Crt Animation Enabled
• ICS Transition Animations Enabled
• Ads Free
• Better Touchscreen Sensitivity
• Adrenaline™ CPU Control + Adrenaline Boost™ Included

- Control your CPU a breeze | Adrenaline CPU Control

- Boost your system performance | Adrenaline Boost 

How to Update Galaxy GIO S5660 with XWKT7 based Adrenaline Custom ROM Firmware

Procedure to Update Galaxy GIO S5660 with Adrenaline Firmware:

• Download the XWKT7 based Adrenaline Custom ROM firmware Package from here to your computer. Once downloaded, connect your phone to the computer and place the zip file in your phone.

• Disconnect the phone from computer and turn Off the device so that it can be entered in the recovery mode. The recovery mode in the Galaxy GIO S5660 can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. Additionally, you can also enter the Galaxy GIO in the recovery mode from the ROM Manager app.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the XWKT7 based Adrenaline Custom ROM firmware Package which you have placed in the phone.

• Once the device is updated, you will have to select the option of “reboot system now” for rebooting the device. You can check whether the device has been updated or not from the path ”Settings > About phone” where the current firmware version will be shown as XWKT7 Adrenaline firmware.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Congratulations, you have now successfully applied the firmware of Adrenaline based XWKT7 in your Galaxy GIO S5660. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

»»  READMORE...

Download and install AT & T Samsung Galaxy S3 Gets UCALH9 Based Software Update

 

So if you are an AT & T Galaxy S3 customer then grab the latest firmware on your device now by going through the Settings> About Device > Software Update and then finally tap on Check for Updates.

»»  READMORE...

Download and install - Update Galaxy S2 GT I9100 with Official ICS XWLPX 4.0.4 Firmware

 

How to Update Galaxy S2 GT I9100 with Official ICS XWLPX 4.0.4 Firmware

Procedure to Update Galaxy S2 with ICS XWLPX Firmware:

• Download XWLPX Firmware Package and Odin from here to your computer. Once downloaded, extract both the zip files preferably to the desktop. Now, turn off the computer so that it can be then entered in the download mode.

• Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

• Open Odin in your computer. Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM Section will turn Yellow.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

• Install the USB Drivers in your computer &
• Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Click on “PDA” and select the tar file which you got after extracting the firmware update package. After selecting the PDA file, click on “Start” to start the process of firmware update. As soon as the device is updated successfully, the device will be restarted. As soon as you see the home screen or language preference setting options, you can then disconnect the device and turn Off the device in the recovery mode.

• Recovery mode in Samsung Galaxy S II I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” for clearing out all the cache data present in your device. Once it’s done, select “reboot system now”. As soon as the device is rebooted, you can check the same whether the firmware update has been applied or not from the path “Settings > About phone > Firmware version” where it will be mentioned as XWLPX.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

»»  READMORE...

Download and install - Update Galaxy ACE S5830i with Simplicity Custom ROM Firmware

 

Procedure to Update Galaxy ACE S5830i with Simplicity Custom ROM Firmware:

• Download Simplicity Firmware Package from here to your computer. Once downloaded, connect your Samsung Galaxy ACE 5830i with the computer and place this file in your device.

• After placing the files, disconnect the Galaxy ACE 5830i device and turn off the device so that it can be entered in the recovery mode. Ensure that you haven’t placed the zip file deep into the sub folders.

• The recovery mode in the Galaxy ACE S5830i can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. You can also enter the device in the recovery mode from the “ROM Manager” app which you can download from the Google PLAY Store.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Simplicity Firmware Package which you have placed in the phone. Once the file is selected, it will take around 4 -5 minutes for applying the same. Please note that it will take more than normal time for rebooting the device for the first time. Just in case if the device refuses to boot up, all you need to do is to just enter the device in the recovery mode and wipe all the cache and data from the recovery mode.

Once it’s done, the device will be restarted and bingo there you go, you have now successfully learnt on how to apply this Gingerbread based Simplicity custom ROM firmware in your device. Do let us know in the comments section below just in case if you face any issues as we will be more than happy t help you out.

»»  READMORE...

Download and install - Update Galaxy Note N7000 with Official ICS 4.0.4 XXLRQ Firmware

 

 

• Reviews
  • Galaxy S3
  • Note
  • One X
  • Razr
  • LG 4X HD

• 
  
• 
  
• 
  
• 12

How to Update Galaxy Note N7000 with Official ICS 4.0.4 XXLRQ Firmware

After XXLRK firmware update, it’s time for XXLRQ ICS 4.0.4 for Galaxy NOTE N7000 which comes with advanced features and stable Modem. This latest update fixes all the issues related to frequent Wi Fi disconnections and also issues related to frequent “No Network” issues. This all new firmware version ropes in the goodness of gallery which was there for the TIZEN OS. This update has been officially rolled out for the users of Germany and in the coming days, the same will be pushed to other countries. As of now this update can only be applied to the N7000 International version of Galaxy Note, but in the coming days it will be extended to other operator devices as well.

The best part of this update is that it’s an official firmware update released by Samsung and not the custom ROM firmware and can be applied to all the devices which have the model number as N7000. This update should not be applied on the network locked devices as it will then brick the device for which we should not be held responsible.

Features of XXLRQ ICS 4.0.4 for Galaxy NOTE N7000:

- new launcher (like the Galaxy S3)
– new gallery with fancy 3D effects
– new contact list
– pop-up video can now be resized
– slightly changed contact list layout
– you can now save contacts in the S-Clound (like google contacts)
– performance improved!
– added S-Cloud (there is no dedicated App but after flashing you will be asked if you want to sycn all your settings with samsung)
– added new motion: call contact currently displayed if you raise the phone
– added bloatware (NTV, Lieferheld, ChatOn, myTaxi)
– black clipping not fixed

Before proceeding to apply this update, backup all the data present in your phone so as to make sure that just in case if the data gets lost or corrupted, the same can be restored with the help of below steps,

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

Download Drivers for Galaxy Note from here. 32 bit (x86) Windows  |   64-bit (x64) Windows. Minimum battery charge left in the phone should be at least 50% so as to ensure that device doesn’t get turned Off in the middle of firmware update.

Disclaimer: At Android Advices, we have made sure in all respects that all the information regarding the firmware update is mentioned correctly in this article. We hold no responsibility in any manner just in case if any damage happens to your Samsung Galaxy Note N7000 which is a very unlikely event if you follow the instructions carefully.

So assuming that you have followed all the above mentioned instructions, you can now head over to the next step where we have briefed the instructions on how to apply this latest update in your Galaxy Note.

Procedure to Update Galaxy Note N7000 with XXLR1 ICS 4.0.4 Firmware:

• Download the XXLR1 Firmware Package and Odin from here to your computer. Once both these packages are downloaded, extract in your computer with the help of WinRAR or WinZip to get the tar file named “N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5” and Odin Executable file.

• Open Odin tool in your computer and turn Off your phone so that it can be then entered in the download mode. The download mode in Galaxy Note can be entered by pressing  Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Up key to continue entering the Download Mode.

• Click on “PDA” to select “N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5” and then click on Start to start the process of firmware update for updating the firmware. The process of firmware update will take around 4 – 5minutes. Once it’s done, the device will be rebooting on its own, you can see the progress bar which will indicate the progress of firmware update.

• Disconnect the device and follow the on screen instructions so as to use the device in the normal mode. Just in case if you are getting force close errors, turn off the device and enter the device in the recovery mode. In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.

Do let us know in the comments section just in case if you face any issues or need any further assistance. You can check that whether the firmware update is updated or not from the path “Settings > About Phone” where the firmware update will be shown as ICS 4.0.4 version.

 

»»  READMORE...

Download and install - Update Samsung Galaxy S2 GT I9100 with Official ICS 4.0.4 XWLPO Firmware

 

How to Update Samsung Galaxy S2 GT I9100 with Official ICS 4.0.4 XWLPO Firmware

Procedure to Update Galaxy SII GTI9100 with Official ICS 4.0.4 XWLPO:

• Download ICS 4.0.4 XWLPO Firmware package & Odin from here to your computer. Once downloaded, extract the same to get the tar file and Odin executable file. Now, open Odin in your computer and turn off your phone so that it can be entered in the download mode.

• Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

• Connect your Galaxy S2 with your computer / Laptop and then in Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

• Install the USB Drivers in your computer &
• Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Once the ID: COM section is turned Yellow then click on “Start” for applying the firmware update. It will take around 4 -5 minutes for applying the update. Once the device is updated, the device will be rebooted and then you need to disconnect the device.
• Now, turn Off the device so that it can be entered in the recovery mode. Recovery mode in Samsung Galaxy S II I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
• As soon as the device is rebooted, you can check the same whether the firmware update has been applied or not from the path “Settings > About phone > Firmware version” where it will be mentioned as XWLPO.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

So there you go you have now successfully updated the device with the latest firmware XWLPO in your Galaxy S2 GT I9100. Do share with us in the comments section just in case if you face any issues in the comments section below.

»»  READMORE...

Download and install - Update Galaxy SL I9003 with REMICS ICS Custom ROM Firmware

 

Procedure to Update Galaxy SL I9003 with remics ICS Custom ROM Firmware:

• Download the Remics Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and then place the zip file in your device. Disconnect the device and turn off the phone so that it can be entered in recovery mode. The recovery mode can be entered by pressing the Volume Down Key + OK button, and holding both simultaneously press the Power Button.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Remics Custom ROM Firmware Package which is placed in the phone. It will take around 3 – 4 minutes for applying the update. Also, you will see that the device might just stay on the S Logo for more than 3 -4 minutes.

• Once the update process is completed, the device will again land back to the recovery screen. In the recovery screen, select “++++ Go Back ++++” and then choose the option of “reboot system now” for rebooting the system. If in any case if you come across the force close errors then all you need to do is to just enter the device in the recovery mode and wipe all the cache data as well as wipe all the data present in your device.

Tip: Just in case if due to some reasons if the update process gets failed or interrupted, then you need to apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps.

So there you go, you have now successfully installed the latest firmware update of Remics in your device. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

»»  READMORE...

Download and install - Update Galaxy S2 GT I9100 with ICS Omega 15 Custom ROM Firmware

 

Procedure to Update Galaxy S2 GT I9100 with Omega 15 Custom ROM Firmware:

• Download the Omega 15 Custom ROM firmware package from here to your computer. Once downloaded, connect your phone to the compute with the help of original USB cable and place the zip file in your phone.

• Now, disconnect the device and turn off the same so that it can be entered in the recovery mode. You can enter the device in the recovery mode via the ROM Manager app or manually. To enter recovery mode manually, press Volume Up Key + Menu button and then press the Power button to enter the device in the recovery mode. If the device boots up in the normal mode, then again follow the above steps so as to boot the device in the recovery mode.

• Now, in recovery mode select “Wipe Cache” and “Wipe data/factory reset” so as to make sure that all the data is wiped off successfully or else you may get errors like Force Close. Now, select “install zip from internal sd card” to get an array of files which are there in your device. Select the Omega 15 Firmware Zip file which you have placed in your phone with the help of Volume keys and power button.

• Now, wait for the firmware update to get applied successfully and once its done the phone will land up in the recovery mode screen where all you need to do is to just select the option of “reboot system now” for rebooting the device normally.

• Please note that it may take longer time than expected for rebooting the device. If the device gets stuck in the S Logo for longer period of time then you need to re insert the battery and re follow all the above mentioned instructions.

So there you go, you have now successfully installed the latest firmware update of Omega 15 Custom ROM firmware in your device. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

»»  READMORE...

Download and install - Update Galaxy S3 GT I9300 with XXDLI5 Jellybean 4.1.1 Firmware

 

Procedure to Update Galaxy S3 with XXDLI5 Jellybean 4.1.1 Firmware:

• Download Odin and Jellybean XXDLI5 Firmware Package from here to your computer. Once its done, you need to extract the Firmware zip file and Odin.

• Open Odin executable file in your computer and turn off your Galaxy S3 device so that it can be entered in the download mode.

• The download mode in Galaxy S3 GT I9300 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Connect your device to the computer with the help of original USB cable and click on “PDA” in Odin to select the tar file “I9300XXDLI5_I9300OXADLI5_I9300XXDLI5_HOME.tar.md5”. Ensure that the ID : COM section in Odin has turned yellow.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
        Install the USB Drivers in your computer &
        Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Click on “Start” to start the process of firmware update. Make sure that the re partition option is not ticked. . Please be informed that the device will take longer time than expected for rebooting the device. To check on whether the firmware is applied successfully or not, you will have to check the same from the path “Settings > About Phone > Firmware Version” where it will be shown as Jellybean 4.1.1 Firmware Update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Congratulations, you have now successfully applied the update of Jellybean 4.1.1 Firmware Update. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

»»  READMORE...

Download and install - Manual Update with Official ICS 4.0.4 Firmware

 

Procedure to Update T Mobile Galaxy Tab 7.7 with Official ICS Update:

• Download the ICS 4.0.4 Firmware Package and Odin from here to your computer. Once downloaded, all you need to do is to just extract the Odin package to get the Odin.exe. Open Odin in your computer and turn off the device so that it can be entered in the Download mode.

• Download Mode in T Mobile Galaxy Tab 7.7 can be entered by pressing the Volume Down + Power button till the device gets turned ON in the download mode. If the device gets turned ON in the normal mode, then you need to retry entering the device in the download mode.

• Connect your Tablet with the computer using the Original USB cable while the Odin is opened in your computer. Once you connect the device to the computer, ID : COM section will turn Yellow which will indicate that all the drivers have been installed.

• Click on “PDA” to select the “T859UVLH6_T859TMBLH6_T859UVLH6_HOME.tar.md5” and click on “Start” for starting the firmware update process. It will take around 3 – 4 minutes for applying the update. As soon as the device is updated successfully, it will be rebooted automatically.

• From the path “Settings > About Tablet > Firmware Version” you can check on whether the firmware has been updated or not as it will show the current firmware as ICS 4.0.4 firmware version.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

You have successfully updated your device with the latest ICS 4.0.4 firmware version. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

»»  READMORE...

Download and install - Update Galaxy S3 I9300 with XXDLI6 Jellybean 4.1.1 Firmware

 

Procedure to Update Galaxy S3 with Jellybean 4.1.1 XXDLI6 firmware update:

• Download Odin and XXDLI6 Firmware Package from here to your computer. Extract both the files in your computer and open Odin in your computer.

• Turn off your S3 so that it can be turned ON in the download mode. Download mode in Galaxy S3 GT I9300 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• In download mode, connect your device to the computer with the help of original USB cable and click on “PDA” in Odin to select the tar file “I9300XXDLI5_I9300OXADLI5_I9300XXDLI5_HOME.tar.md5”. Ensure that the ID : COM section in Odin has turned yellow.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

            Install the USB Drivers in your computer &

            Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Click on “Ok” to start the process of firmware update. As soon as the firmware is updated successfully, the phone will reboot automatically. Please note that it may take longer time than expected for rebooting the device as it’s the first reboot after the firmware update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

We will come up with the Rooting process very soon so that you can make the most out of your phone. To check the firmware version after the update, navigate to the path “Settings > About Phone” where the device will show the current firmware version as XXDLI6 Jellybean 4.1.1. Congratulations, do let us know if you face any issues faced in the process of applying the update as we will try to address the same as soon as possible.

»»  READMORE...

Download and install - Update Galaxy Gio GT S5660 with MIUI 2.4.20 Custom ROM Firmware

 

 

How to Update Galaxy Gio GT S5660 with MIUI 2.4.20 Custom ROM Firmware

Procedure to Update Galaxy GIO S5660 with MIUI 2.4.20 Firmware:

• Download the MIUI 2.4.20 Firmware Package from here to your computer. Once downloaded, connect your phone to the computer with thehelp of original USB cable and place these two files in your Galaxy GIO.

• Disconnect the USB Cable and turn off the same so that it can be entered in the recovery mode. The recovery mode in the Galaxy GIO S5660 can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. Additionally, you can also enter the Galaxy GIO in the recovery mode from the ROM Manager app.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the MIUI 2.4.20 Zip file which is placed in the phone.

• Once the update process is completed, the device will again land back to the recovery screen. In the recovery screen, select “++++ Go Back ++++” and then choose the option of “reboot system now” for rebooting the system. If the phone refuses to show the home screen even after 5 minutes of restart, you need to then reinsert the battery.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

To check on whether the firmware has been updated or not, navigate to the path “Settings > About Phone” where in you can find the current firmware version. Do let us know in the comments section if you face any issues in the process of firmware update.

»»  READMORE...

Download and install - Update Galaxy S3 I9300 with XXDLI7 Jellybean 4.1.1 Firmware Update

 

Procedure to Update Galaxy S3 with XXDLI7 Jellybean 4.1.1 Firmware:

• Download XXDLI7 Firmware Package from here to your computer. Connect your phone to the computer with the help of original USB cable and place the zip file in your device’s memory card.

• Disconnect the device once the file is copied in the computer and turn off the device so that it can be entered in the recovery mode. Recovery mode in Galaxy S III GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button).

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the placed XXDLI7 Firmware Package. Once the file selection is over, the firmware will be applied within 10 minutes, you can see the progress of firmware update with the help of a progress bar.

• As soon as the firmware is applied successfully, you will have to select “Go Back” to select the option of “reboot system now” for rebooting the device in the normal mode.

Note: Just in a rare case if your Samsung Galaxy S III refuses to turn ON or say if it gets stuck on the Samsung Galaxy S3 Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

• If you get any force close errors, then turn off the device and enter the device in the recovery mode to select the options of clear cache and wipe data as it will clear out all the cache data which are responsible for force close errors.

To check now on whether the firmware has been updated or not, head over to the path “Settings > About Phone” and see whether it reads XXDLI7 firmware version 4.1.1 or not. Do let us know if you come across any issues in the process of applying the firmware update. So there you go, you have now successfully upgraded your Galaxy S3 with the latest Jellybean 4.1.1 firmware update.

»»  READMORE...

Download and install - Update Galaxy S3 with Android Revolution HD Jellybean Custom ROM Firmware

 

Procedure to Update Galaxy S3 with Android revolution custom ROM firmware:

• Download the Android revolution custom ROM firmware Package from here to your computer and place the same in the external micro SD Card of your Galaxy S3 smartphone.

• If connected with the computer, disconnect the same and turn off your S3 so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Android revolution custom ROM firmware Package which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. Also, note that it may take longer time than the normal time for the first reboot.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not.
Congratulations, do let us know if you face any issues faced in the process of applying the update as we will try to address the same as soon as possible.

»»  READMORE...

Download and install Most Stable Jellybean 4.1.1 Firmware for Galaxy S GT I9000

 

  

Galaxy S GT I9000 – Steps to Install Most Stable Jellybean 4.1.1 Firmware

Procedure to update Galaxy S GT I9000 with the Latest Jellybean 4.1.1 Firmware Update:

• Download Google Apps Package and Jellybean 4.1.1 Firmware package from here to your computer. Once downloaded, place these two zip files in your Galaxy S’s internal memory.

• Disconnect the phone and simply turn off the device so that it can be entered in the recovery mode. Samsung Galaxy S can be entered in the recovery mode by pressing the Volume Up Key, Center button, and holding both simultaneously press the Power Button.

• In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition which will clear out all the cache data present in your device, if you skip this step then you may face issues like force close issues in your phone.

• Select “install zip from sd card” > “choose zip from sd card” and then choose the Jellybean 4.1.1 firmware package and then the Google Apps Package to select “Yes” with the help of Volume rocker keys and Menu button. Once the file is selected, it will take around 5 – 7 minutes for applying the same. Once the update is applied, select “go back” and then “reboot system now”.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section so that just in case if you face any issues faced in the process of applying this update as we will try our level best to sort out the same. Congratulations, you can check the firmware version from the path “Settings > About Phone”.

»»  READMORE...

How to Root Nexus S – Android 2.3 Gingerbread with Bootloader

  

Procedure to root Nexus S mobile device:

• First of all you will need to go to fast boot mode / boot loader mode which can be entered by holding Volume up key and power button.

• Now, you will need to download recovery-clockwork-herring and need to transfer the same into the root of SD Card and need to boot into Clockwork recovery and then you will have to install the su-2.3.6.1-ef-signed file by downloading the same from here or it can also be downloaded from an all new Android Market place. This is it you have now successfully rooted your Nexus S mobile device.

So, just by following three simple steps you can easily root your Nexus S device.

»»  READMORE...

Download and install Update Galaxy SL I9003 with Jellybean 4.1.1 Codename 3.5.0 Firmware

 

How to Update Galaxy SL I9003 with Jellybean 4.1.1 Codename 3.5.0 Firmware

Procedure to Update Galaxy SL GT I9003 with Codename Android 3.5.0 Firmware:

• Download the Codename Android 3.5.0 Firmware package & Google Apps from here to your computer. Once downloaded, connect your phone to computer and place these two zip files in your device. Ensure that you are not placing these files into the sub folders.

• Disconnect the device and turn off the same so that it can be entered in the recovery mode. Press and hold the Volume Up + Home buttons together, and then press the Power button till you see the Green Android Robot along with the Recovery mode options list. If the device boots up in the normal mode, retry the process.

• You can also boot the device in the recovery mode by selecting the appropriate option in the recovery mode. In recovery mode select “install zip from external SD Card” to find the placed “Codename Android 3.5.0 Firmware package” and also the “Google Apps”. Once it’s selected it will take around 4 -5 minutes for applying the same.

• Once you see that the firmware has been applied successfully, select “go back” & “reboot system now” for rebooting the device in the normal mode. To check on whether the firmware has been applied or not, you can head over to the path “Settings > About Phone” which will show that the firmware has been applied successfully.

Note: Just in a rare case if your Samsung Galaxy SL I9003 refuses to turn ON or say if it gets stuck on the Motorola Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go, you have now successfully installed the latest version of Codename Android 3.5.0 firmware in your device. Do share with us in the comments section just in case if you face any issues.

»»  READMORE...

Download and install Galaxy S PLUS GT I9001 with ICS 4.0 based Ehndroix Custom ROM Firmware

 

Procedure to Install Ehndroix custom ROM firmware in Galaxy S GT I9001 PLUS:

• Download the Ehndroix custom ROM firmware along with the Add On package from here to your computer. Once downloaded, you will then have to connect your Galaxy S GT I9001 PLUS device to computer with the help of original USB cable and place these two zip files in your device.

• Disconnect  the device and turn off the same so that it can be entered in the recovery mode. Recovery mode in Galaxy S PLUS I9001 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Additionally, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Now, select “Go Back” and select “install zip from sd card” > “choose zip from internal sd card” and then select the Ehndroix custom ROM firmware first and then the Add On package which you have placed in your phone.

• Once selected, it will take around 5 -6 minutes for applying this update. Also, for the first boot it will take more time than usual as it has to setup all the system files and other apps which are necessary ones. Ensure that you have cleared the cache in your device as it will wipe all the unwanted data from the recovery mode just in case if you face any force close issues in any of the Google Apps or the core apps present in your device.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the latest firmware Ehndroix custom ROM firmware update which is ICS based in your Galaxy S GT I9001 PLUS smartphone.

»»  READMORE...

Download and install Samsung Galaxy Nexus & Nexus S 4G with Android 4.1.1 Jelly Bean Update (Sprint updates)

 

Improvements, Fix & Enhancements
As usual stuff that latest upgraded OS version brings the several fix of the previous version and other  enhancements, the following are included in this big update.

• Jelly 4.1 runs faster, smoother
• Provides an enhanced search experience
• Rich notifications with actions in control
• A better and smart keyboard

So with that update to the device the remaining batch of devices by Google to be updated are still Verizon Motorola Xoom LTE and Verizon Galaxy Nexus. The leaks and the customs ROM always flow in with masses and do check them out on our blog with detailed procedure on how to can update with the same.
We are sure after you update with Jelly Bean, you would be happy to see your device breathing a new life.

»»  READMORE...